Wheel Truing Mandrel Set
SKU : RMXY9613Regular price $3.99 Sale price $1.99
It's true that each official wheel and axle set is virtually identical to every other wheel and axle set. However, that also means that every set is just a little bit different. And sometimes, that's all it takes to make a fast car the winning car! With tires, the differences are roundness and smoothness. And the rule is: the rounder and smoother the tire, the faster your car is going to be. And the easy way to make your tires as round and smooth as they can be is the Wheel Truing Mandrel Set.
Official BSA Wheel Adjust Tool
SKU : RMXY9616Regular price $4.99 Sale price $2.49
Winning takes more than just speed, it takes preparation and paying close attention to details. And it doesn't do any good to have the fastest car around if it doesn't meet the official guidelines. This tool will help you make sure your car is fast and legal when race day comes.
Taper Chassis Weight
SKU : RMXY9602Regular price $3.99 Sale price $1.99
Gain a competitive edge and make your Pinewood Derby® racer run faster. Just add Tapered Chassis Weights! These ultra-safe, 99.99% lead-free weights are sectioned off into different sizes, allowing you to easily fine-tune your car per race regulations. Use the included screws to safely secure the weights to your car's chassis. Pliers required.
Axle Polishing Set
SKU : RMXY9615Regular price $3.79 Sale price $1.89
Real race cars use bearings to reduce the speed-robbing friction between moving parts. Pinewood racers don't. When the axles roll against their slots, drag is created that slows down your wheels. What can you do? The answer is as simple as the cars themselves: just use Pinewood Derby®'s high-quality polishing system to make the axles as smooth as possible, and put the maximum "glide into your ride". Sand the axles first, then polish them to a fine shine with pumice...and leave your competition behind!
Stick On Designer Weight
SKU : RMXY9606Regular price $3.99 Sale price $1.99
Gain a competitive edge and make your Pinewood Derby® racer run faster. Just add Stick-On Designer Weights! These ultra-safe, 99.99% lead-free weights are sectioned off into different sizes, allowing you to easily fine-tune your car per race regulations. Install by drilling a 0.4" dia. hole into your racer, and then use the included double-sided tape to safely secure the weights to your car's chassis. Drill and pliers required.
Bar Chassis Weight
SKU : RMXY9605Regular price $3.99 Sale price $1.99
Gain a competitive edge and make your Pinewood Derby® racer run faster. Just add Bar Chassis Weights! These ultra-safe, 99.99% lead-free weights are sectioned off into different sizes, allowing you to easily fine-tune your car per race regulations. Use the included screws to safely secure the weights to your car's chassis. Pliers required.
SKU : RMXY8668Regular price $7.99 Sale price $3.99
Even when your car isn't on track, it can still be the center of attention. And this is an easy way to make sure everyone can see your masterpiece. Instructions are included, but it's so simple to set up that you hardly need them. Just place the black base on a flat surface, insert the clear uprights and rotate them until they're just the right width for your ride. Put your car in place, and it's ready to be admired!
SKU : RMXY8667Regular price $10.49 Sale price $5.29
A wheel that turns without wobbling is a wheel that turns "true." And as a rule of thumb, the straighter the axle, the "truer" and faster and more friction-free a wheel can turn. And since going faster is always good in racing, making sure your axles are as straight as can be is, too. It's easy to do, too. All you need are a hammer and this simple tool. And all you do is tap and turn, tap and turn, tap and turn. The result: straighter axles, higher speeds and more chances to win. Sound good? Then tap away!
Sand Paper Grip Set
SKU : RMXY8669Regular price $7.99 Sale price $3.99
A mirror-smooth finish on your car requires smooth, level surfaces, free of high spots and dips. Small, Medium and Large grips make sure you can do the job everywhere, from the smallest, tightest corners to the largest open areas. Just insert the handle on the back of the grip, cut a piece of sandpaper* to fit and use the double-sided tape included to attach it to the grip. Here's a tip: Use a light, firm touch when you sand. Using a lot of muscle may get you done faster, but won't get you the pro-style finish you want!
SKU : RMXY9647Regular price $9.99 Sale price $4.99
The maximum legal weight for a Pinewood Derby® Racer is 5 ounces (141 grams). If you car weighs more than that, your race is over before it's even started. Make sure you're legal with the easy-to-use Pinewood Derby® Scale Kit. Put 25 ordinary quarters (not included) on one end of the scale's balance bar. Set your pine car on the opposite end. Add stick-on weights to the chassis as needed. When the balance bar rests level, your racer is good to go!
Subscribe to get special offers, free giveaways, and once-in-a-lifetime deals.